Panasonic PT-JW130F Page 35 Operating Instructions Manual Download

Page: 35 / 217

Chapter 2

Getting Started — Installing/removing the projector

ENGLISH - 35

12) Align the orientation of the adapter to the track system.

Hold up the adapter and align the orientation as follows.

When using the track system of Nordic Aluminium, align the side with the protrusion (adapter) to the side without the protrusion

(track system).

Adapter

For Nordic Aluminium

Track system

Protrusion

Adapter

Protrusion

13) Mount the adapter to the track system.

Insert the adapter into the opening of the track system.

The adapter of the projector cannot be mounted to the position of the tapping screw fixing the track system to the ceiling or beam.

Allowing for attaching the adapter cover to be performed in Step

17)

, mount the adapter to the track system using the rough dimension

shown in the figure.

30 mm (1-3/16") -

50 mm (1-31/32")

14) Turn the adapter lever to secure the adapter to the track system.

Completely turn the adapter lever in the direction of the allow shown in the figure.

The track system and the projector are electrically connected.

Lever

Adapter

Summary of Contents for PT-JW130F


























































































































































































































Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands

Panasonic PT-JW130F, Operating Instructions Manual

Search results

Summary of Contents for PT-JW130F

Reviews:

Related manuals for PT-JW130F

Brands by name

Popular brands