manualshive.com logo in svg

Panasonic PT-JW130F, Operating Instructions Manual, Page: 170 / 217

Share
Download
Panasonic PT-JW130F Operating Instructions Manual Download Page 170

Chapter 5

 

Operations — Content Manager

170 - ENGLISH

2)  Edit [Start], and [End] or [Duration].
3)  Click the [Save] button.

 

f

The edited interruption schedule is registered by overwrite.

Note

 

f

Interrupted still image content name cannot be edited.

 

f

If the playback time overlaps the existing registered interruption schedule, then the interruption cannot be saved.

Duplicating a registered interruption schedule

Duplicate a registered interruption schedule.

Registered 

interruption 

schedule duplication

1)  Click   of the registered interruption schedule to be duplicated.

 

f

The 

[Interrupt edit]

 screen is displayed.

2)  Edit [Start], and [End] or [Duration].
3)  Click the [Save] button.

 

f

The interruption schedule is duplicated, and registered in the SD card.

Note

 

f

Interrupted still image content name cannot be edited.

 

f

If the playback time overlaps the existing registered interruption schedule, then the interruption cannot be saved.

Deleting a registered interruption schedule

Delete a registered interruption schedule.

Registered 

interruption 

schedule deletion

Summary of Contents for PT-JW130F


























































































































































































































Reviews:

No comments