background image

Chapter 5

Operations — Content Manager

144 - ENGLISH

Editing the content list

Register or delete still image/movie/music content to be registered in a timetable, and edit the registration information.
Refer to the descriptions of the following items.

 

f

“Registering content in a content list” (

x

 page 144)

 

f

“Deleting content registered in a content list” (

x

 page 146)

 

f

“Editing registration information of content” (

x

 page 147)

 

f

“Creating a playlist” (

x

 page 148)

Registering content in a content list

Register still image/movie/music files in the SD card as contents from the client computer.

Content selection tab

Content list

1) 

In the timetable page, click the tab of the content to register among the “Content selection tab”.

 

f

Clicking the tab changes the “Content list” display.

Content addition

2)  Click  .

 

f

The 

[Add content]

 screen is displayed.

Content addition

3)  Click   on the [Add content] screen.

 

f

The file selection screen is displayed.

Summary of Contents for PT-JW130F


























































































































































































































Reviews: