Chapter 4
Settings — [NETWORK] menu
80 - ENGLISH
[ENCRYPTION]
Select the encryption method used for the communication between the projector and the network.
[NONE]
Select this item not to use encryption.
It can be selected only when [AUTHENTICATION] is set to [OPEN]
or [SHARED].
[WEP]
Select this item when the encryption method is WEP.
[TKIP]
Select this item when the encryption method is TKIP.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[AES]
Select this item when you use AES for the encryption method.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[DEFAULT KEY]
Set a number from 1 to 4 for the default key.
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
[KEY1] - [KEY4]
Set WEP key to the key number selected in [DEFAULT KEY].
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
You can set a 64-bit or 128-bit WEP key. Enter five single-byte alphanumeric characters (10 digits for
hexadecimal) for 64-bit, or enter 13 single-byte alphanumeric characters (26 digits for hexadecimal)
for 128-bit.
[KEY]
Set the key.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK] or [WPA2-PSK].
Enter 8 to 63 alphanumeric characters or 64-digit hexadecimal.
[EAP]
Select the EAP set for RADIUS server.
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP]. The types of EAP that can be selected are as follows.
[PEAP(MS-CHAPv2)], [PEAP(GTC)], [EAP-TTLS(MD5)], [EAP-TTLS(MS-CHAPv2)], [EAP-FAST(MS-
CHAPv2)], [EAP-FAST(GTC)]
[USER NAME]
Enter the user name to be used for authentication in single-byte alphanumeric characters (space not
included, 64 characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
[PASSWORD]
Enter the password to be used for authentication in single-byte alphanumeric characters (64
characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
Note
f
Contact the manufacturer of the access point (radio repeating device) in use if wireless LAN connection cannot be established via the
access point even after “Setting for projector” (
x
page 101) is executed.
f
If you use EAP, settings of the projector need to be configured according to the RADIUS server settings. Consult your network administrator
for the RADIUS server settings.
f
If you use EAP in combination with an access point where SSID broadcast is disabled, select [WPA-EAP] or [WPA2-EAP] for authentication
method even when the authentication of the access point is WPA-EAP/WPA2-EAP.
7) Press
as
to select [STORE], and press the <ENTER> button.
f
Press
as
to select [RETURN] and then press the <ENTER> button to return to the [WIRELESS LAN] ([USER1], [USER2], or
[USER3]) screen (1/2).
8) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
The following settings are configured for [USER1], [USER2], and [USER3] as the factory default.
[DHCP]
OFF
[IP ADDRESS]
192.168.11.100
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.11.1
[DNS1]/[DNS2]
(Blank)
[SSID]
Panasonic Projector
[AUTHENTICATION]
Open
[ENCRYPTION]
None
Changing the [USER1]/[USER2]/[USER3] name
1) Press
as
to select [WIRELESS LAN].
