Panasonic PT-JW130F Operating Instructions Manual Download Page 169

Page: 169 / 217

Chapter 5

Operations — Content Manager

ENGLISH - 169

4) Enter the interrupted still image content name, [Start], and [End] or [Duration].

For an interrupted still image content name, up to 24 characters in single byte can be entered.

5) Click the [Save] button.

It is registered in the interruption schedule.

The selected still image content is registered in the SD card.

Note

Yon can register only still image files in interruption playback.

If the playback time overlaps the existing registered interruption schedule, then the interruption cannot be saved.

It is possible to start interruption playback during playback of a slideshow.

Editing the information of registered interruption schedule

Edit the playback time of a registered interruption schedule.

[Interrupt list] screen

Registered

interruption

schedule edit

[Interrupt edit] screen

2
3
4

1 Interrupted still image content name

Displays the selected interrupted still image content name.

2 [Start]

Sets the time to start interruption playback.

3 [End]

Select the radio button, and set the time to end the interruption

playback.

4 [Duration]

Select the radio button, and set the time to start the interruption

playback.

5 Interrupted still image content being edited

Displays the selected still image content.

6 [Return] button

Click this to return to the [Interrupt list] screen.

7 Projector time

Displays the time of the connected projector.

8 [Save] button

Click this to confirm the settings, and register the interruption

schedule in the SD card.

Procedure

1) Click of the registered interruption schedule to be edited.

The

[Interrupt edit]

screen is displayed.

Summary of Contents for PT-JW130F


























































































































































































































Search results

Summary of Contents for PT-JW130F

Reviews:

Panasonic PT-JW130F, Operating Instructions Manual, Page: 169 / 217

Search results

Summary of Contents for PT-JW130F

Reviews: