Chapter 3
Basic Operations — Turning on/off the projector
ENGLISH - 47
Note
f
The above initial setting screen is the one displayed when the projector is turned on for the first time after purchase. When [ALL USER
DATA] is executed from the [SETUP] menu
→
[INITIALIZE], the [STANDBY MODE] setting before the execution is displayed.
Initial setting (time zone)
Set [TIME ZONE] according to the country or region where the projector is used.
Once the initial setting is completed, setting can be changed from the [SETUP] menu
→
[DATE AND TIME].
The current settings are displayed in the [LOCAL DATE] and the [LOCAL TIME]. If a change is necessary, set with the [SETUP] menu
→
[DATE AND TIME] after completing the initial setting.
1) Press
qw
on the remote control to switch the setting.
4/4
<
>
Please set up a time zone according to the area of your
country or region.
INITIAL SETTING
TIME ZONE
2014/01/01
+09:00
LOCAL DATE
00:00:00
LOCAL TIME
CHANGE
SET
ENTER
2) Press the <ENTER> button on the remote control.
f
Confirm the setting value and complete the initial setting.
Note
f
In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the time zone
according to the region where you use the projector.
Making adjustments and selections
It is recommended to adjust the focus after 30 minutes have elapsed projecting.
3)
1) 7)
6)
4)
2)
1) Press the <FOCUS> button on the remote control to roughly adjust the focus of the projection light.
(
x
page 50)
2) Set the [SETUP] menu
→
[PROJECTION METHOD] (
x
page 68) and [VERTICAL FLIP] (
x
page 69)
according to the installation condition.
f
Refer to “Navigating through the menu” (
x
page 56) for the operation of the menu screen.
3) Press the <LIGHTING/PROJECTOR> button on the remote control to switch the projection mode of
the projector to lighting mode or projector mode. (
x
page 49)
4) When using the projector in the projector mode, press the <HDMI>, <MEMORY VIEWER>, <Miracast>,
<Panasonic APP>, or <SIGNAGE> button on the remote control to select the input to project.
(
x
page 49)
5) Adjust the orientation of the main unit to adjust the projection position. (
x
page 37)
6) Press the <ZOOM> button on the remote control to adjust the projection size. (
x
page 50)
7) Press the <FOCUS> button on the remote control again to adjust the focus.
Note
f
The initial setting screen is displayed when the projector is turned on for the first time after purchase or when [ALL USER DATA] in the
[SETUP] menu
→
[INITIALIZE] is executed. Refer to “When the initial setting screen is displayed” (
x
page 45).
