Panasonic Electric Works Nordic AB
MEW01091
Rev: 3
EBL128 Operating Instructions V1.1.x
78
23
Access
To use the key pad in EBL128 (to get access to the menu tree), it is
necessary to log on with an access code for level 2B or 3A.
See also chapter "Access levels", page 22.
Open the EBL128 door (= level 2A), press the "Access" button (P8)
and continue as follows:
Explanations:
Action
(in the table) = use push button / key (e.g. signed "Access").
Text in display
(in the table) = what is shown in the display in
EBL128 (c.i.e.).
Comments
(in the table) = Comments to the text in the "Action" and
"Text in display" columns.
Use "
" and "
" to scroll between the main menus H1-H10.
Use "A" to accept.
Some main menus have sub menus. Use "
" and "
" to scroll
between the sub menus (e.g. B1-B10). Use "A" to accept.
NOTE!
The menus are circular, i.e. if you scroll with "
" and the last
menu is reached, the first menu comes up next. It is also possible to
make "quick jumps" within each menu, e.g. in menu H1 press "6" for
a quick jump to menu H6. ("0" = menu H10).
Instead of a menu identification (e.g. B1), the letter L can be shown,
which means that it is a List. Use "
" and "
" to scroll in the list.
If
or
is shown in a menu, use "
" or "
" to get more
information.
Use "
" and "
" to move the cursor in a menu.
Use "Return" to return from a sub menu to the main menu (H1-H10).
Use "Return" to log off from a main menu (H1-H10).
There will be an automatic log off 60 minutes after the last action (i.e.
if the key pad / push buttons have not been used for 60 min.).
Action
Text in display
Comments
"Access"
Access code: _
Enter code for level 2B
or 3A (four digits).
Access code:
The digits are replaced
(
) in the display.
NO ACCESS!
Wrong access code was
entered. Try again.
Perform monthly test
ACCEPT? H1
Correct access code was
entered. Menu H1 is
shown. Press "A" to accept
(to perform monthly test)
or
scroll / jump to the next
menu (H2-H10).
