Panasonic Electric Works Nordic AB
MEW01091
Rev: 3
EBL128 Operating Instructions V1.1.x
100
27.4
Sensors activating SERVICE signal (H4/U4)
Service signal is indicated by LED "Service" (L12). The week
average sensor value is over the service level respectively for one or
more sensors. (Regarding the service signal levels, see Planning
Instructions, chapter "Service signal".
Menu H4/U4 is a list of the sensor(s) activating service signal.
NOTE!
Service signal is only information that a sensor has to be
cleaned / replaced soon. The service signal has to be acknowledged,
see chapter "Acknowledge SERVICE signal (H8/S1)", page 119.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 78.
Scroll to menu H4.
Present system status on display
ACCEPT? H4
"A"
Disablement
ACCEPT?
U1
Scroll to menu U4.
Sensors activating SERVICE signal
ACCEPT?
U4
Press "A" to accept.
"A"
Sensor : ZZ-AA (technical address aaa)
needs service L
L = a list in which you
can scroll. Press "Return"
to menu U4. (If there are
no sensors in the list,
menu U4 will be shown
again.)
"Return"
Sensors activating SERVICE signal
ACCEPT?
U4
Scroll or press "Return"
to menu H4. Scroll or
press "Return" to log off.