Panasonic KX-TVS80, Installation Manual

Page: 166 / 416

SYSTEM MAINTENANCE AND TROUBLESHOOTING
166 Installation Manual
7.2.6 Error Log Display (ELOG)
Use the ELOG command to diagnose VPS problems. Selection of this command will display
an error log.
Type ELOG, then Press RETURN.
Note
The following tables display and explain the errors that the system can identify.
* = Port number (1-2)
Table 29 Device Error Log Indications
Indication Meaning
CPU MEM-GET CPU card software memory acquisition error.
CPU card is short of memory temporarily because
of too much traffic.
CLOCK Clock access error. Clock IC is out of order.
Check the hardware.
FLASH
MEMORY
DATA R/W (xx:yyyy) Flash Memory access error. If there is a sector that
often causes errors, check the flash memory.
xx :
IDE error code
yyyy : read/write error sector number
DSP* SCAN DSP-SCAN error. DSP is out of order. Check the
hardware.
DSP* FIFO DSP/FIFO error. During the system is handling
calls, there is something wrong with DSP and
FIFO memory temporarily.
CPU APPLICATION (x) Application error. While the system is handling
calls, temporary application error occurs.
x: port number
COM. Communication error between CPU and DSP
DATA Process error of voice data
MEM. Memory error
PRG. Program error in CPU card
R/W Read/Write error of Flash Memory
$ ELOG
DEVICE ERROR TIME
JUL-14 14:00 PM MEM-GET 1. CPU
JUL-14 14:00 PM 2. CLOCK
JUL-14 14:00 PM DATA R/W (xx:yyyy) 3. FLASH
MEMORY
JUL-14 14:00 PM SCAN 4. DSP*
JUL-14 14:00 PM FIFO 5. DSP*
JUL-14 14:00 PM APPLICATION (x) 6. CPU
* = Port number (1-2)
All manuals and user guides at all-guides.com