Panasonic KX-TVS80 Installation Manual Download Page 86

Page: 86 / 416

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX

Installation Manual

Assignment of the ports to be connected to the VPS

Go to the "1-3 Extension Port Assignment" screen.

Select the appropriate VPS card (101: DLC/DHLC) in the "Card No." menu.

Set the attribute of the valid ports to be connected to the VPS to "VPS (DPT)".

Click "Apply" to save the changed data.

Note:
The parameters except for "Attribute" will disappear and the DN (Directory
Number) will be cleared.

Screen output:

All manuals and user guides at all-guides.com

Summary of Contents for KX-TVS80

































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVS80

Reviews:

Related manuals for KX-TVS80

Brands by name

Popular brands

Panasonic KX-TVS80, Installation Manual

Search results

Summary of Contents for KX-TVS80

Reviews:

Related manuals for KX-TVS80

Brands by name

Popular brands