Panasonic KX-TVS80, Installation Manual

Page: 105 / 416

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 105
4.5 COMMON DIGITAL INTEGRATION
FEATURES AND SETUP PROCEDURES
The following features can be used on any KX-T proprietary telephone (7000 series analog;
7200/7400 series digital). KX-T7000 series is used with the KX-TA624. The KX-T7200 and
KX-7400 series are used with the KX-T series PBX that uses DPT Integration.
4.5.1 Live Call Screening (LCS) Programming
LCS notifies subscribers of incoming messages to their mailboxes. The notification method is
programmable for hands-free or private. Hands-free allows the user to monitor a recording
through the speakerphone and, if desired, intercept the call by lifting the handset. The private
mode notifies the user with an alert tone when a message is being recorded. By pressing the
LCS button, the user can monitor the message and intercept the call by going off-hook. System
Programming or PC Programming (only available for KX-TD500 users) also determines
whether the mailbox continues to record after the user intercepts the call.
4.5.2 Live Call Screening Password Assignment
To allow the Live Call Screening feature to work at an extension, the extension must have the
LCS button lit. To light this button on the telephone, press the LCS button, then enter the
password. This password prevents others from activating the LCS feature and listening to the
messages as they are being left. (It is not necessary to enter PITS Programming to activate this
feature.)
PC programming is also available for KX-TD500 users (see 4.5.6
Live Call Screening
Assignment via PC Programming).
1.
Lift the handset or Press the SP-PHONE button.
2.
Dial the feature number [77 ] (for KX-TA624) or [799] (for KX-T series PBX that uses
DPT Integration) from system program.
3.
For KX-TA624
Press a 3-digit password ([000]-[999]) twice and #.
For KX-T series PBX that uses DPT Integration
Press a 3-digit password ([000]-[999]) twice.
You will hear a confirmation tone, then a dial tone.
Screen output: The 3-digit password you entered is displayed.
4.
Hang up or Press the SP-PHONE button.
5.
Repeat these steps for each telephone.
All manuals and user guides at all-guides.com