Panasonic KX-TVS80, Installation Manual

Page: 164 / 416

SYSTEM MAINTENANCE AND TROUBLESHOOTING
164 Installation Manual
1.
Type PASS, then Press RETURN.
2.
To create a password or change an existing password, Go to Step 3.
To clear a password, Go to Step 4.
3.
To create a password or change an existing password:
a) Type [1] or [2]
Note
When you press [2] to change the System Reset/Clear password, you should
type the current (OLD) password before entering a new one.
b) Type the password.
c) Type the password again for verification.
4.
To clear a password:
a) Type [1] or [2].
b) Press ENTER. Do not type a password on this screen.
c) Press ENTER. Do not type a password on this screen.
Note
The password entered on the screen will not appear. The VPS does not
distinguish the capital letter from the small letter.
7.2.4 Set Time (TIME)
Use the TIME command to set the system date and time. A number of system functions require
that the system time and date be set correctly. These functions include message waiting
notification, external message delivery, call-retries-after initial-failure-to-connect, and
automatic deletion of messages.
Time Synchronization: If you have DPT Integration between the VPS and your PBX (latest
software version), the date and time are automatically sent from the PBX to the VPS whenever
the PBX sets the date and time. Also, this transfer occurs whenever DPT Integration is
established.
$ PASS
1: Administrator Password 2: System Reset/Clear Password :=
Maximum 10 characters
NEW PASSWORD : =
Verification: =
Maximum 10 characters
NEW PASSWORD : =
VERIFICATION : =
All manuals and user guides at all-guides.com