Panasonic KX-TVS80, Installation Manual

Page: 245 / 416

SYSTEM ADMINISTRATOR'S GUIDE
Installation Manual 245
Message
Scanning with
Information 1. Yes
2. No
(No)
If set to "Yes", the VPS adds the message sender's name and
the recording date and time to the message during the
message scan.
Prompt Mode 1. System
2. User 1
3. User 2
(User 1)
Specifies the language used for voice prompts.
Note: If User 1 or User 2 is specified as Prompt Mode but
not recorded by the Message Manager, the VPS will
automatically play the factory-recorded System prompts in
English. By default, User 1 and User 2 prompts are not
recorded.
Remote Call
Forward to CO 1. Yes
2. No
(No)
If set to "Yes", Remote Call Forwarding can be set to an
outside (CO) line; the Message Manager can program
(either from a remote location or on-site) his extension to
forward various types of calls to either "Telephone No.1" or
"Telephone No.2" (preprogrammed in the Mailbox Setting),
or to any other telephone number.
Note: The Remote Call FWD to CO feature is available if
DPT Voice Mail Integration is activated with a Panasonic
KX-T series telephone system.
Important Note: With respect to PBX programming, it is
possible that "Call Forward to CO" is disabled. To enable
VPS Remote Call Forwarding, the KX-TD1232, for
example, must be programmed properly. For the COS of the
extensions whose calls are to be forwarded to a CO line,
enable the following: [504] Call Forward to Outside Line.
Delete
Message
Confirmation 1. Yes
2. No
(No)
If set to "Yes", the VPS requests confirmation from the
mailbox owner before erasing a message left in the mailbox.
If set to "No", the message is erased immediately.
Authorization
for Message
Notification 1. Yes
2. No
(Yes)
If set to "Yes", the Message Manager is able to utilize the
Message Waiting Notification feature. The sub-parameters
to be set include Beeper Callback No. Entry Mode, MWL
Notification for Unreceived Message, and Device
Notification for Unreceived Message. If set to "No", sub-
parameters cannot be assigned.
Table 41
Parameter Value Range
(Default)
Description/Function
All manuals and user guides at all-guides.com