Panasonic KX-TVS80 Installation Manual Download

Page: 62 / 416

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS

Installation Manual

[Recommended Settings (2)]

If the VPS is only answering incoming outside calls not answered by the Operator (Operator
backup):

Assignment of DIL 1:1 line

Go to the "4-1 Trunk Line" screen.

Assign "Destination Day/Night/Lunch/Break" for each trunk (CO line) to a
specific extension number.

Click "Apply" to save the changed data.
Note:
Specify the FDN for the extension group to which Operator has been assigned.
Screen output:

All manuals and user guides at all-guides.com

Summary of Contents for KX-TVS80

































































































































































































































































































































































































































Search results

Summary of Contents for KX-TVS80

Reviews:

Related manuals for KX-TVS80

Brands by name

Popular brands

Panasonic KX-TVS80, Installation Manual

Search results

Summary of Contents for KX-TVS80

Reviews:

Related manuals for KX-TVS80

Brands by name

Popular brands