Panasonic KX-TVS80, Installation Manual

Page: 110 / 416

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
110 Installation Manual
2.
Press the Flexible (CO, DSS) button that you wish to assign as a Live Call Screening
Cancel button.
3.
Dial [93].
Screen output: LCS Cancel
4.
Press STORE. The STORE indicator light turns on.
The display shows the initial programming mode.
5.
For KX-TA624
Set the MEMORY switch to "SET".
For KX-T series PBX that uses DPT Integration
Press the PROGRAM button or lift the handset.
6.
Repeat these steps for each telephone.
The Live Call Screening Cancel Button Assignment is optional; Live Call Screening can also
be canceled by Pressing the FLASH button.
4.5.9 Two-Way Recording Button Assignment via Station
Programming
For the Two-Way Recording feature to work at an extension, the extension must have a TWR
button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow the procedure
below to assign a TWR button on an extension. (This is a station level program and should be
done at each individual telephone.)
PC programming is also available for KX-TD500 users (see 4.5.12
Button Assignment via
PC Programming).
1.
Enter PITS Programming:
For KX-TA624
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-T series PBX that uses DPT Integration
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PITS-PGM Mode.)
2.
Press the Flexible button (CO or DSS/BLF) that you want to assign as the TWR button.
3.
Dial [90].
Screen output: 2Way-Rec:
4.
Dial the Voice Mail extension number.
Screen output: 2Way-Rec: _ _ _
(_ _ _ = The extension number you entered).
5.
Press Store.
6.
For KX-TA624
Set the MEMORY switch to "SET".
For KX-T series PBX that uses DPT Integration
Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
All manuals and user guides at all-guides.com