Panasonic KX-TA1232, Programming Manual

Page: 132 / 216

General Programming
132 Programming Guide
[417] Outside Line Name Assignment
Description
Assigns names of the company or customer to each outside line so that the operator or
extension user can find the destination which the caller is trying to reach before answering. If
Caller ID is assigned, each extension can select either the initial display, Caller ID or line name.
Selection
• Outside line (CO) number: 01 through 12, ( =all outside lines)
• Name: 10 characters (max.)
Default
All outside lines — Not stored
Programming
1.
Enter 417.
Display: 417 CO LINE NAME
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 12 names. Each name has a maximum of 10 characters.
• To assign all outside lines to one selection, press the key in step 3. In this case, the display
shows the contents programmed for outside line 01.
• You can select the initial display, Caller ID or outside line name, by Station Programming.
pg.book 132 ページ ２００１年７月３日 火曜日 午後２時４４分