Panasonic KX-TA1232, Programming Manual

Page: 58 / 216

General Programming
58 Programming Guide
[113] VM Status DTMF Set
Description
Sets the DTMF (Dual Tone Multi-Frequency) signals transmitted to your Voice Processing
System (VPS) to inform the VPS of the VPS ports states quickly:
The following signals are sent to the VPS with the assigned DTMF signals:
RBT (ringback tone):
This signal is sent when calling an extension.
BT (busy tone):
This is sent when the called extension is busy.
ROT (reorder tone):
This is sent when the dialed number is invalid.
DND (DND tone):
This is sent when the other extension has DND assigned.
Answer:
This is sent when the other extension answers the call.
Disconnect:
This is sent when the other extension hangs up.
Confirm (confirmation tone) :
This is sent when the feature number for "Message Waiting Lamp" is valid.
FWD VM RBT (FWD to VM ringback tone) :
Not available (reserved).
FWD VM BT (FWD to VM busy tone) :
This is sent when the called extension has set Call Forwarding to VPS.
FWD EXT RBT (FWD to extension ringback tone) :
Not available (reserved).
Selection
• RBT / BT / ROT / DND / Answer / Disconnect / Confirm / FWD VM RBT / FWD VM
BT / FWD EXT RBT
• DTMF signal number: 3 digits (max.)
Default
RBT — 1; BT — 2; ROT — 3; DND — 4; Answer — 5; Disconnect — #9; Confirm —9; FWD
VM RBT — 6; FWD VM BT — 7; FWD EXT RBT — 8
Programming
1.
Enter 113.
Display: 113 VM DTMF SET
2.
Press NEXT to program ringback tone status.
To program another status, keep pressing NEXT until the desired status is displayed.
pg.book 58 ページ ２００１年７月３日 火曜日 午後２時４４分