Panasonic KX-TA1232, Programming Manual

Page: 29 / 216

General Programming
Programming Guide 29
[006] Operator / Manager Extension Assignment
Description
Assigns the jack number for a manager and/or operators. The manager extension can perform
System Programming and manager services. The operators have the ability to perform operator
services.
Selection
• OPE-1 (operator 1) / OPE-2 (operator 2) / MNGER (manager)
• Jack number: 01 through 32
Default
Operator 1 — Jack 01;
Operator 2 and Manager — Not stored
Programming
1.
Enter 006.
Display: 006 OP-1, 2, MGR
2.
Press NEXT to program operator 1.
Display: OPE-1:Jack01
To program another item, you can also keep pressing NEXT or PREV until the desired
one is displayed.
3.
Enter a jack number.
To assign no operator or manager, press CLEAR.
To change the current entry, press CLEAR and enter the new jack number.
4.
Press STORE.
5.
To program another item, press NEXT or PREV.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• Up to two operators and a manager can be programmed.
• The manager cannot be assigned the jack number of the DSS Console Port set in program
[007] "DSS Console Port and Paired Telephone Assignment".
• If there is no operator or manager, press CLEAR in step 3.
Features Guide References
Manager Extension
pg.book 29 ページ ２００１年７月３日 火曜日 午後２時４４分