Panasonic KX-TA1232, Programming Manual

Page: 209 / 216

Default Values
Programming Guide 209
[619] Extension Call Forwarding — No Answer
Time
All jacks — 0
[620] Lunch / Break Group Assignment All groups — Blank
[621] Cordless PT Extension Port All jacks — all outside lines — No
[624] Common Area Call Log Check
Assignment
All jacks — Enable
[625] Room Monitor Assignment All jacks — Disable
[800] SMDR Incoming / Outgoing Call Log
Printout
Outgoing calls — All; Incoming calls — On
[801] SMDR Format Page length — 66; Skip perforation — 0
[802] System Data Printout Not applicable.
[803] Music Source Use Hold and BGM — Music 1
[804] External Pager BGM All external pagers — Disable
[805] External Pager Confirmation Tone On
[806] Serial Interface (RS-232C) Parameters New line code = CR+LF; Baud rate = 9600; Word
length = 8;
Parity bit = Mark; Stop bit = 1
[809] DISA Security Type Trunk (Outside Line) Security
[810] DISA Tone Detection Enable
[812] DISA DTMF Repeat Dial and Call — Repeat
[813] Floating Number Assignment Pager 1=196; Pager 2=197; DISA 1=198; DISA
2=298; E-Group 1=191; E-Group 2=192; E-Group
3=193; E-Group 4=194; E-Group 5=291; E-Group
6=292; E-Group 7=293; E-Group 8=294;
[815] DISA Built-in Auto Attendant Disable
[818] Doorphone Ringing / Tone Pattern
Selection
All doorphones — Triple
[819] Doorphone Access Tone Selection All doorphones — Enable
Program Default
pg.book 209 ページ ２００１年７月３日 火曜日 午後２時４４分