Panasonic KX-TA1232, Programming Manual

Page: 156 / 216

General Programming
156 Programming Guide
[603-604] DIL 1:N Extension and Delayed Ringing —— Day / Night
Description
The Direct In Lines (DIL) 1:N feature can be assigned to ring more than one extension. All
incoming calls from the programmed outside lines are directed to the specified extensions.
These programs assign the extensions and the notification method for each outside line in both
day and night modes.
Selection
• Jack number: 01 through 32, ( =all jacks)
• Outside line (CO) number: 01 through 12, ( =all outside lines)
• Disable (disable) / Immdt (immediate ringing) / 1RNG (1 ring delay) / 3RNG (3 ring
delay) / 6RNG (6 ring delay) / NoRNG (no ring)
Default
All jacks — all outside lines — Immediate ringing —— Day / Night
Programming
1.
Enter a program address (603 for day or 604 for night).
Display example: 603 DIL 1:N DAY
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:CO01:Immdt
4.
Enter the outside line number.
You can also keep pressing or until the desired outside line number is displayed.
5.
Keep pressing SELECT until the desired selection is displayed.
6.
Press STORE.
7.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
8.
Repeat steps 4 through 7.
9.
Press END.
Conditions
• An extension can be assigned as the destination of as many outside lines as required.
• To assign all jacks or all outside lines to one selection, press the key in step 3 or step 4.
In these cases, the display shows the contents programmed for Jack 01 or for outside line 01.
pg.book 156 ページ ２００１年７月３日 火曜日 午後２時４４分