Panasonic KX-TA1232, Programming Manual

Page: 196 / 216

General Programming
196 Programming Guide
05 8 Selects how long the system keeps the
door opener unlocked. 0 : 3 s
1 : 5 s 1 Door Opener
9 Enables or disables dial tone 2 when an
extension sets programmable extension
features such as Call Waiting. 0 : disable
1 : enable 1 None
10 Determines the result when pressing the
FLASH button during an outside call
(When Area 01-bit 3=0).
Flash: Disconnects and accesses the
same outside line.
Terminate: Terminates the outside line
and accesses the intercom.
0: Terminate
1: Flash 1 Flash
11 Selects the message waiting ring type: 3
quick rings or 2 normal rings, for single
line telephones. 0 : 3 times by
40 ms
1 : 2 times by
280 ms
1 Message Waiting
12 Selects the SMDR format for an
incoming call with Caller ID. The
caller's number only or caller's number
only or caller's number and name is
selected. 0 : <Incoming> +
caller no.
1 :<I> + caller no.
+ name
1 Station Message
Detail Recording
(SMDR)
13 Enables or disables the SMDR printout
for RC (when an incoming call occurs)
and AN (when an incoming call is
answered). 0 : enable
1 : disable 1 None
14 Selects the result when a call from DISA
(Direct Inward System Access) is
invalid. 0 : IRNA
1 : reorder tone is
sent
1 None
15 Selects the result of pressing "0"
(default); calls operators 1 and 2 at the
same time or Operator 1 first and then
Operator 2 if Operator 1 is busy. 0 : Operators 1 and
2
simultaneously
1 : Operator 1 first
and then
Operator 2
1 Operator Call
16 Enables or disables the SMDR printout
when the Timed Reminder starts and the
alarm is not answered. 0 : enable
1 : disable 1 Timed Reminder
Explanation
Area Bit Description Selection Default References
pg.book 196 ページ ２００１年７月３日 火曜日 午後２時４４分