Panasonic KX-TA1232, Programming Manual

Page: 18 / 216

General Programming Instructions
18 Programming Guide
Programming Structure
Program Address Programming Group Description
[0XX] Manager Programming These programs may be accessed by the system
manager of the customer to meet frequent changes
requested by the customer.
[1XX] System Programming Entire system programming.
[2XX] Timer Programming Flexible system timer setting.
[3XX] TRS Programming Assignment of Toll Restriction.
[4XX] Outside Line Programming Setting of outside line and outside line group values.
[5XX] COS Programming Setting of Class of Service (COS).
[6XX] Extension Programming Setting of extension values.
[8XX] Resource Programming Assignment of customer-supplied peripherals
connected to the system.
[9XX] Option Programming Used to answer the user's requirements or troubles,
if needed.
Sample of Description Explanation
6. To program another speed dial
number, press NEXT or
PREV, or SELECT and the
desired speed dial number
.
7. Repeat steps 4 through 6.
8. Press END.
(15)
(16)
(17)
(15) Select the best way for you to store another speed
dial number. Pressing the NEXT / PREV allows
you to select the next higher / lower speed dial
number. You can also keep pressing them until the
desired one is displayed. If you press SELECT
and the desired speed dial number, the selected
code is displayed.
Conditions
(18)
(19)
• Each speed dial number has a
maximum of 24 digits. The valid
characters are 0 through 9, the
# keys, and the FLASH, PAUSE,
SECRET and – (hyphen) buttons.
and
Features Guide References
System Speed Dialing
(16) You can continue to program another entry.
(17) After you have stored all your entries, finish this
program by pressing END. After pressing END
you can go to any program address you desire.
You can return to the Initial Message mode any
time by pressing END.
(18) Tells you what you should notice or consider when
doing the programming.
(19) Lists all of the features related to the
programming. These features are described in
Section 3.
pg.book 18 ページ ２００１年７月３日 火曜日 午後２時４４分