Panasonic KX-TA1232, Programming Manual

Page: 197 / 216

General Programming
Programming Guide 197
06 1 Determines whether the account code is
printed out or not (shown in dot) in the
SMDR. 0 : not printed out
1 : printed out 1 Account Code
Entry
2-4 Unused
5 Determines whether to printout the last
entered or the first entered account code
in the SMDR. 0 : first entered
code
1 : last entered
code
1 Account Code
Entry
6 When an incoming call is received in a
Hunting group (Ring, Circular,
Terminate), this program determines
whether the extension where the Do Not
Disturb feature is set receives the call or
not.
0 : receive
1 : not receive 1 None
7 When an incoming call is received in a
Hunting group (Ring, Circular,
Terminate), this program determines
whether the extension where the Call
Forwarding feature is set receives the
call or not. 0 : receive
1 : not receive 1 None
8 Enables or disables Circular and
Terminate Hunting. 0 : disable
1 : enable 1 Station Hunting
9-16 Unused
07 1-6 Unused
7 Allows a beep in Music on Hold. 0 : beep
1 : usual music
source
1 Music on Hold
9, 8 Determines how the call is treated when
a call from DISA arrives at a Do Not
Disturb (DND) extension or busy
extension which has disabled Call
Waiting. 01 : IRNA
(Intercept
Routing - No
Answer)
10 / 11 : receive at
the CO button
(only flashes)
00 : busy tone is
sent
11 Direct Inward
System Access
(DISA)
10-16 Unused
08 1-16 Unused
Explanation
Area Bit Description Selection Default References
pg.book 197 ページ ２００１年７月３日 火曜日 午後２時４４分