Panasonic KX-TA1232, Programming Manual

Page: 193 / 216

General Programming
Programming Guide 193
02 7 An outside line set to pulse or call
blocking mode in program [402]
Dial
Mode Selection can have two settings.
This assigns the pulse break ratio during
dial pulsing. Select an an appropriate
ratio depending on the single line in
your country.
0 : 60 %
1 : 67 % 0 Dial Type
Selection
8 Assigns if an extension's mailbox
number is substituted by the extension
number or it is programmable (free). If a
call is forwarded or rerouted to the Voice
Processing System (VPS), this system
automatically transmits the mailbox
number to the VPS to specify the user's
mailbox. To make it programmable,
select "1 (free)," then assign the number
in program [609]
Voice Mail Access
Codes.
0 : extension
number
1 : free
0 Voice Mail
Integration
9 Unused
10 Determines the source of Music Source
1 for Music on Hold and BGM. 0 : internal music
source
1 : external music
source
1 • Background
Music (BGM)
• Background
Music (BGM)
– External
• Music on Hold
11-12 Selects inter-digit pause for pulse
dialing.
00 : 630 ms
01 : 830 ms
10 : 1030 ms 01 None
13 Selects the intercom dial tone frequency. 0 : normal
1 : distinctive
0 None
14 Selects the extension-hooking signal
detection time. 0 : 84-1000 ms
1 : 200-1000 ms 1 None
16, 15 Unused
03 1-12 This bit is provided to assign PAD
Switch Control (volume control of
received calls on an outside line). This
can be assigned per outside line. The
outside line numbers [1] through [12]
correspond to outside lines 1 through 12.
0 : 0 dB
1 : -3 dB 0 None
13-16 Unused
Explanation
Area Bit Description Selection Default References
pg.book 193 ページ ２００１年７月３日 火曜日 午後２時４４分