Panasonic KX-TA1232, Programming Manual

Page: 91 / 216

General Programming
Programming Guide 91
[212] Call Duration Count Start Time
Description
Sets the number of seconds the system waits between the end of dialing and the start of the
Station Message Detail Recording (SMDR) timer for outgoing toll calls. When the system has
sent out all the digits to the central office and this timer expires, the system starts counting the
call. A display telephone shows the elapsed time of the call. The starting time and the duration
of a call are recorded in the SMDR record.
Selection
Time (seconds): 0 through 60
Default
0 sec
Programming
1.
Enter 212.
Display: 212 CALL TIMER
2.
Press NEXT.
Display example: Time: 0 sec
3.
Enter the time.
To change the current entry, press CLEAR and enter the new time.
4.
Press STORE.
5.
Press END.
Conditions
• The timer starts counting after all the digits are dialed. This timer does not apply to
incoming calls. The timer for incoming calls starts immediately.
• You cannot leave the entry empty.
Features Guide References
Display, Call Information
Station Message Detail Recording (SMDR)
pg.book 91 ページ ２００１年７月３日 火曜日 午後２時４４分