Panasonic KX-T336, System Reference Manual

Page: 1284 / 1605

10-D-2
(21292)
DATA ERROR No.
300
301
302
310
320
330
331
332
333
334
335
336
337
338
339
340
2.00 Error Messages Related to
the Assigning Items in the
Other Commands
If there is a wrong entry related to the assigned
by the other commands, the following appears on
the message line when storing the entry: “DATA
ERROR (xxx).”
The (XXX) indicates an error message number
shown below and possible causes of the errors
and countermeasures for them are as follows.
Probable Cause
Setting DN which is not stored in the hundred
block.
Specified extension DN is not stored.
Telephone type of the extension paired with
DSS console is not PITS.
Setting DN to the DSS console.
Setting trunk group except DID on CO-line on
DID card. Or, assigning trunk group of DID to
CO-line on the card except DID.
Tenant is different.
As assigned to the destination of 1 : N of trunk
group, impossible to change tenant.
As assigned to the destination of doorphone
call, impossible to change tenant.
Setting one pickup group to ICM & PAG group
belonging to different tenant.
Changing tenant of ICM/PAG group without
canceling extensions.
As assigned to the destination of paging from
attendant console, impossible to change Tenant.
As assigned to call placing mode of Trunk
group, impossible to change Tenant.
As assigned to night answer point for CO-line,
impossible to change Tenant.
Attempting to change the tenant of Trunk group
without removing the CO lines which belong to
the trunk group.
Attempting to change the tenant of Trunk group
without canceling the setting of 1:N destination
for the trunk group.
Deleting is impossible because it is assigned in
another item.
Countermeasure
Enter data in hundred block. Or, set DN
which is stored in hundred block.
Store the extension DN.
Paired extension should be changed to a
PITS.
Set DN to assignable port.
Assign trunk group to the correct kind of
card.
Assign the same tenant.
Cancel the 1 : N destination.
Cancel the doorphone call destination.
Set it to the same tenant. Or, change tenant
after deleting pickup group.
Change after canceling extensions.
Impossible to move extensions to the other
tenant.
Change the destination of attendant paging.
Change assigning of incoming mode.
Change assignment of night answer point.
Change after removing the CO lines.
Impossible to move CO lines to the other
tenant.
Change after canceling 1: N destination.
Change the item beforehand.