manualshive.com logo in svg

Panasonic KX-T336, System Reference Manual

Share
Download
Panasonic KX-T336 System Reference Manual Download Page 210

3-C-3

Reference

VT

Dumb

Reference

VT

Dumb

Reference

VT

Dumb

Reference

VT

Dumb

Programming <1>

Programming <4>

“System-Class of Service”,

ARS/Local Access

9-D-4.01 10-C-7.00

“Group-Trunk Group (2/2)”,

PBX Access Code (No
Restriction)
PBX Access Code (Restriction)

System Programming

9-E-1.02 10-C-15.00

Extension users may be restricted from Local
Trunk Dial Access by “System-Class of Service”,
ARS Local Access, as follows:

If set to “No ACCS” (No Access), calling is
impossible (reorder tone is returned).

If set to “W/RSTR” (With Restriction), calling is
possible with restriction by “System-Class of
Service”, Trunk Group Access.

If set to “No RSTR” (No Restriction), calling is
possible with no restriction by “System-Class of
Service”, Trunk Group Access.

Programming <2>

“System-Class of Service”,

Trunk Group Access

9-D-4.02 10-C-8.00

Programming <3>

“System-Local Access Group”,

Local Access Trunk Group
Hunt Sequence

“Group-Trunk Group (1/2)”, Type

9-D-5.00

9-E-1.02

10-C-9.00

10-C-14.00

When “Type” of the trunk group which is set to
“Local Access Trunk Group Hunt Sequence 01”
in Local Access Group is programmed to “PBX,”
the types of the other trunk groups preset to other
“Hunt Sequence” than “01” are all regarded as
“PBX”.  “PBX Access Code (No Restriction)” and
“PBX Access Code (Restriction)” of the trunk
group which is set to “Hunt Sequence 01” are
used to judge.

9-D-4.01

9-D-5.00

10-C-7.00

10-C-9.00

“Class of Service (1/2)”

Toll Restriction Level (Day)
and (Night)

“System-Local Access Group”,

Toll Restriction Level

When TRLL is programmed higher than TRLE,
the procedure advances to the next step.
When TRLL is programmed equal to or lower
than TRLE, the call is not restricted and
performed.

  System-Local Access Group

OFLPRG LIN DIR

 Toll Restriction Level       08

Toll Restriction Level of
Local Access (TRLL)

TRLL is assigned in the item below:

Reference

VT

Dumb

System Programming

System Programming

System Programming

System Programming

If this system works into the host PBX, PBX
access code is required to dial through the
connected PBX.
To execute Toll Restriction, register PBX Access
Code in “Group-Trunk Group”, PBX Access Code
(Restriction).
To access the Host PBX without executing Toll
Restriction, register PBX Access Code in “Group-
Trunk Group”, PBX Access Code (No Restriction)

Programming <5>

Summary of Contents for KX-T336






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands