Panasonic KX-T336, System Reference Manual

Page: 1167 / 1605

10-C-30
Item
Number
Input Value Assigning Items CLR
14
15
Continued
(70695)(F)
: clearing function is effective
for the item
Conditions
The assigning items:Type, Incoming Mode (Day/Night), Destination (DIL 1:N Only)
and Type and Number can be changed only when all the trunks belonging to the
trunk group are not in use. If any trunk is used, it is impossible to change.
Pause Time
Hook Switch Flash Time
1 : 1.5 s
2 : 2.5 s
3 : 3.5 s
4 : 4.5 s
0 : none
1 : 80 ms
2 : 300 ms
3 : 600 ms
4 : 900 ms
5 : 1200 ms
Item
Number
03
04
05
06
11
Tenant
Incoming/Outgoing
Incoming Mode
(Day)
Incoming Mode
(Night)
Dialing Plan
If “ ” is displayed here, “Operation (OPR)”, Tenant Service is set to “N
(No).”
When ”Incoming Only” is selected in the trunk group with DID, the following
items are assignable but they do not work at all in Incoming Only mode.
• Disconnect Time
• Pause Time
• Hook Switch Flash Time
• Max. Dial No. after EFA Signal
For further information, refer to “3. Other Conditions” on page 9-E-7.
Refer to Section 9-E-1.01 “Trunk Group (1/2).”
If “2 (Fixed)” or “3 (Flexible)” is changed to another option, it cancels all the
settings of CO lines in “CO Line (COL)”, Night Answer Point (Type: No.)
which belong to the trunk group.
If “2 (Fixed)” is changed to “3 (Flexible)” and vice versa, the Night Answer
Points are not canceled.
Refer to Section 9-E-1.01 “Trunk Group (1/2).”
***
For the relation between trunk group/CO line setting and PITS DN button setting,
refer to Section 9-E-1.01 “Trunk Group (1/2).”