Panasonic KX-T336, System Reference Manual

Page: 1285 / 1605

10-D-3
(21292)
Probable Cause
Extension assigned to NEXT HUNT STATION is
already assigned to NEXT HUNT STATION for
another extension.
Relation between ICM group and Pickup group
assigned for an extension is incorrect.
As PRV-CO is assigned by PITS button
assignment, impossible to change the type of
the trunk group to any other than PRV.
As assigned to Single CO by PITS button
assignment, impossible to change the 1:1
destination of the line to a different PITS.
Attempting to change the tenant of Trunk group
without canceling the setting of 1:1 destination.
UCD group is not assigned.
Attempting to assign DID to Trunk group which
has CO lines belonging to the group.
Attempting to assign the unstored ICM number
to the DSS (ICM) button.
Attempting to assign the ATT which is not
registered as the operator to the maintenance
device.
Specified CO line does not exist.
Specified CO line is not the PVL.
Specified CO line is already assigned as a DIL
1:1 or PRV-CO by another extension.
Impossible to assign because the programmings
for specified CO does not satisfy the condition.
Impossible to assign because the programmings
for specified CO does not satisfy the condition.
Attempting to delete the extension which is
registered as an operator of the tenant.
Attempting to delete the extension which is
registered as the destination of intercept routing
for the Trunk group.
Attempting to delete the extension which is
registered as an ATT busy out extension of
Trunk group.
Attempting to delete the extension which is
registered as an ATT overflow extension for
Trunk group.
DATA ERROR No.
342
343
344
345
346
347
348
350
360
370
371
372
373
374
391
392
393
394
Countermeasure
Assign another extension or clear the
previous assignment.
Make them in proper relation.
Cancel the assignment of the PITS button.
Cancel the assignment of the PITS button.
Change the tenant after clearing all 1:1
destinations of CO lines belonging to the
group.
Assign Pickup group to a UCD group.
Assign DID after clearing all CO lines
belonging to the group.
Assign stored ICM number.
Register the ATT as an operator, or specify
another device.
Specify proper CO line.
Specify proper CO line.
Specify another CO line or cancel the
assignment of the desired line.
Change call placing type to 1:1, or change
group type to unique type.
Change call placing type to 1:N, and group
type to group.
Cancel the assignment as an operator.
Cancel the assignment as the destination.
Cancel the assignment as an ATT busy out
extension.
Cancel the storage as an ATT overflow
extension.