manualshive.com logo in svg

Panasonic KX-T336, System Reference Manual

Share
Download
Panasonic KX-T336 System Reference Manual Download Page 271

2.00 Attendant Console-less

Operation

2.01  Direct In Line (DIL)

Description

Once set in system program, this function makes
it possible for an incoming call from a CO line to
go directly to an extension without assistance of
the attendant.
This function can be performed  in two ways, as
described below.

DIL 1:1:For putting an incoming call from a CO
line trunk to a single destination
Assignable destinations are:

• Extension User
• FDN for Remote
• FDN for UCD group

DIL 1: N: For putting an incoming call from a CO
line to a maximum of eight destinations
simultaneously
Assignable destinations are:

• Extension User
• Pickup Group
• ICM Group

For DIL 1:1, set “Group-Trunk Group”, Incoming
Mode (Day) to  DIL 1:1,  and  program the CO
line to this Trunk Group using “Trunk- CO Line”,
Trunk Group.  Then set the incoming destination
in “Trunk-CO Line”, Direct Termination. 

For DIL 1: N, program “Group-Trunk Group”,
Incoming Mode (Day)  to DIL 1: N,  and program
the “Group-Trunk Group”, Destination  (DIL 1: N
Only) Type and Number.

To use these functions in the Night mode, set the
Day mode to the DIL 1:1 or DIL 1: N setting, and
set “Group-Trunk Group”,  Incoming Mode (Night)
to Day Mode.

Programming

DIL 1:1

DIL 1: N

To use the DIL 1:1 and DIL 1: N functions,
program “Group-Trunk Group”,Incoming/Outgoing
to Both-Way or Incoming Only.

Conditions

If CO buttons are assigned, an incoming call to a
PITS will arrive at one of the CO buttons (except
PCO button).  If no CO button is assigned, it will
arrive at a PDN.

When a DIL 1:1 incoming call arrives at a PDN, it
will also arrive at a PITS having a SDN whose
owner is that PDN.

When a DIL 1: N incoming call arrives at a PDN,
it will not arrive at a PITS having a SDN whose
owner is that PDN.

It is programmable that an incoming CO call
routed via DIL 1:N feature arrives at “CO button
only” or “CO button or PDN button.”  For further
information, refer to Section 10-C-53.00 “World
Select 3 (WS3).”

System Programming

Reference

VT

Dumb

“Group-Trunk Group (1/2)”, 

Incoming Mode (Day)
Incoming Mode (Night)

“Trunk-CO Line”,

Trunk Group
Direct Termination

10-C-14.00

10-C-18.00

9-E-1.01

9-F-1.00

System Programming

Reference

VT

Dumb

“Group-Trunk Group (1/2)”, 

Incoming Mode (Day)
Incoming Mode (Night)

“Group-Trunk Group (2/2)”,

Destination (DIL 1: N Only)
Type and Number

10-C-14.00

10-C-15.00

9-E-1.01

9-E-1.02

3-D-3

Summary of Contents for KX-T336






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands