Panasonic KX-T336, System Reference Manual

Page: 1393 / 1605

13-B-10
Display Example To change the extension number “1000,” name “James,”
department “Sales” to “1000, White, Product” :
Conditions An extension number can be three or four digits.
An extension name can be up to 16 characters including letters,
numbers and special characters (except ", *, /, ~), and the first digit
should be a letter.
A department can be up to eight characters including letters,
numbers and special characters (except ", *, /, ~), and the first digit
should be a letter.
Make sure not to leave a space within a sub command.
For example, if you enter: SET 1000/James/Sales 1001/James/
Div 4, an error message appears on the screen and you cannot
change the data.
In this case use special characters such as “-” to separate words as
“Div-4.”.
Usage of Wild Card Character
One character “*” can be used as a wild card character which
substitute any character in that position.
The wild card character cannot be used for sub parameters of new
data.
<Example 1>
If the following entries are stored:
(1)
APPEND
(2)
DELETE
(3)
LIST
(4)
SET
(5)
HELP
(
C
R
)
(6)
INIT
(
C
R
)
(7) (8)
END
(
C
R
)
*****
Total 1 entry
*****
Set complete
source data
No.
1000
Ext name
James
Dep
Sales
exchanged data
No.
1000
Ext name
White
Dep
Product
DIC > SET 1000/James/Sales 1000/White/Product
No.
Ext name
100
101 Betty
Jack
Dep
Project
Project