Panasonic KX-T336, System Reference Manual, Page: 958 / 1605

9-D-34
(70695)
Description of Assigning Items
1st through 12th Hundred Block Assigns the leading one or two digits for extension DN (Directory
Extension Number). If the leading digit is not programmed, the DN assignment
is not possible.
Conditions
“System-Numbering Plan” setting cannot be changed if “System-Operation”,
Numbering Plan is set to “Fixed 1” or “Fixed 2.” If “Flex” is selected, this setting is
changeable.
When entering “DG 1” to “DG 2,” the cursor does not advance nor return automati-
cally. Use the and keys to move the cursor.
“Parameter Save OK?” will be displayed on this screen, if you attempt to exit this
screen without saving the data change you've made.
Different from other screens, “Parameter Save OK?” is not displayed on this screen
when you press the NEXT/PREV key.
Data storage is executed by the PF 4 (Memory) key or the PF 2 (End) key for all
screens at the same time. Logical check is also performed according to the follow-
ing logic:
Extension numbers and other PBX extension numbers are three or four
digits and the leading one or two digits are assigned in “Numbering Plan”
screens.
Feature numbers may be one, two, three or four digits.
Those numbers assigned in Numbering Plan screens cannot include the
same number assigned to other feature number as the part or whole of it.
For example, if the digit “2” is assigned to the feature number for “Trunk
Group 01-08 Access” and another digits “21” is assigned for “Trunk Group
09-16 Access,” it is checked at the time of data storage. Similarly, “35” and
“351” cannot be present at the same time.
It is possible to store “0” through “9,” “ ,” “#,” as the feature numbers.
However, if “ ” or “#” is included in the feature numbers, those features are not
accessed by the rotary telephone extensions.
1st to 12th Hundred Extension numbers cannot include “ ” and “#.”
Block Extension