Panasonic KX-T336 System Reference Manual Download

Page: 345 / 1605

3-F-43

(21292)

4. Call Forwarding and Station Hunting

(continued)

(FWD-No Answer)

In case of outside calls (DIL 1:1, DISA,DID)

In an incoming outside call is not answered by the extension in a specified time

period (IRNA timer), it will be transferred to another destination. — IRNA

Refer to “6. Intercept Routing No Answer (IRNA)” and “7. IRNA and Station

Hunting” on pages 3-F-47 through 3-F-50 for further information.

Conditions

The Ext.2 is idle.

The Ext.2 is busy.
The VPS 1 is idle.

The Ext.2 and VPS 1 are
busy.

The Ext.3 is idle.

All members of a hunting
group are busy.

Call State

Ringback Tone
(The call is ringing at Ext.1)

↓

Call Forwarding No Answer Time
has been elapsed.

↓

Ringback Tone
(The call is forwarded to the Ext.2
and ringing on it.)

Ringback Tone
(The call is ringing at Ext.1)

↓

Call Forwarding No Answer Time
has been elapsed.

↓

Ringback Tone
(The call is forwarded to the VPS
1 and ringing on it.)

Ringback Tone
(The call is ringing at Ext.1)

↓

Call Forwarding No Answer Time
has been elapsed.

↓

Ringback Tone
(The call is forwarded to the Ext.3
and ringing on it.)

Ringback Tone
(The call is ringing at Ext.1)

↓

Call Forwarding No Answer Time
has been elapsed.

↓

Ringback Tone
(The call is still ringing at Ext.1)

Summary of Contents for KX-T336






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-T336

Reviews:

Related manuals for KX-T336

Brands by name

Popular brands

Panasonic KX-T336, System Reference Manual

Search results

Summary of Contents for KX-T336

Reviews:

Related manuals for KX-T336

Brands by name

Popular brands