Panasonic KX-T336, System Reference Manual

Page: 1310 / 1605

11-C-11
Result
• The following message ap-
pears on the display:
SYS-PGM No?
• The
MEMORY
button indicator
lights in red.
• A message appears on the
display and requires you to
enter the directory number of
the extension whose name
you want to change.
CHG Name? DN
• The
MEMORY
button indicator
light goes out.
• Current entry appears:
<Example>
# 100: Smith
• Dialed name appears on the
display:
# 100: Jack
• The MEMORY button indicator
lights in red.
• Confirmation tone sounds.
5.00 Changing Extension Name
This is used to change extension names.
Operation
1. Set PITS system program-
ming mode.
2. Dial “03.” (program number)
3. Dial the directory number of
the extension whose name
you want to change: three or
four digits.
4. Dial new name of the exten-
sion.
5. Press the MEMORY button
to store the entry.
Comment/Note
• Refer to Section 11-C-1.00
“Entering PITS System
Programming Mode.”
• To enter the name, use 0
through 9,
*
, #, and SELECT
button. For further detail, refer to
“Registration of extension name”
on the next page:
• When you dial, dialed number
winks one by one on the display.
SELECT button