Panasonic KX-T336, System Reference Manual

Page: 512 / 1605

2.03 Call Forwarding-No Answer
Description
Call Forwarding-No Answer provides automatic
call transfer to a preset destination if the
extension user cannot answer the call in a
determined period (that is, if the caller is not
answered while hearing ringback tone in a
specified period).
If the extension setting this function is in the PITS
programming mode, Call Forwarding-No Answer
is disabled and the caller hears busy tone.
Determine the duration from the arrival of a call to
the start of Call Forwarding (period of no answer)
by “System-System Timer”, Call Forwarding-No
Answer Time-Out.
Incoming calls can be forwarded to extension
users, Voice Mail ports, or operators.
“FDN for General Operator Call” is used to assign
operators as the destination of Call Forwarding.
Refer to Section 9-D-1.01 “Operation (1/3)” for
further information.
The following incoming calls do not receive Call
Forwarding treatment.
• A call appearing on ICM button
• A call from doorphone
• A call appearing on PCO button
• A call routed via DIL 1: N feature
• A call directed to a UCD group
To set Call Forwarding-No Answer, assign
“System-Class of Service”, Call Forwarding/Do
Not Disturb to “Yes.”
For setting or canceling this function, two
methods are available:
<1> By pressing the FWD/DND button.
<2> By dialing the feature number for
“Call Forwarding-No Answer Set” and
“Call Forwarding/Do Not Disturb Cancel.”
Programming
Conditions
An extension user may have only one type of Call
Forwarding/Do Not Disturb feature in effect at any
time. If a second type is assigned, the previously
assigned type is canceled.
If the extension to which calls are to be forwarded
itself is in a call forward mode, a call is not
forwarded furthermore. The call rings at the first
forwarded extension. In case of an outside call, if
not answered in a specified time period, the call will
be routed to another destination, if available, based
on the “Intercept Routing-No Answer” feature.
When Tenant Service is employed and “Inter Tenant
Calling” is assigned to “Yes” by programming, a call
from another tenant will not be forwarded if
forwarding destination is an Attendant Console.
Calls from any VM extension will not be forwarded, if
forwarding destination is another VM extension.
An extension user is rejected with reorder tone if he
or she attempts to set the destination to an
extension in the other tenant when Tenant Service is
employed.
• This feature does not function if an extension user
attempts to call the other extension whose call
forwarding-no answer destination is set to his or
her own extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section 4-I-11.00 “Remote Station Feature Control.”
System Programming
Reference
VT Dumb
“System-System Timer”,
Call Forwarding-No Answer
Time-Out
“System-Class of Service (1/2)”,
Call Forwarding/Do Not
Disturb
“System-Numbering Plan
(04/11)”,
Call Forwarding-No Answer
Set
“System-Numbering Plan
(05/11)”,
Call Forwarding/Do Not
Disturb Cancel
10-C-6.00
10-C-7.00
10-C-10.00
10-C-10.00
9-D-3.00
9-D-4.01
9-D-6.04
9-D-6.05
4-F-12
(70695)