manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual, Page: 93 / 422

Share
Download
Panasonic KX-NCP500 Feature Manual Download Page 93

Case 2: When Extn. 101 forwarded the call, Automatic Walking COS was not performed, and 

Send

CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)

 is set to 

Enable

.

–

Displayed CLIP: Outside Caller’s telephone number and name.

Case 3: When Extn. 101 forwarded the call, Automatic Walking COS was not performed and 

Send

CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)

 is set to 

Disable

.

–

Displayed CLIP: The CLIP set for the line that Cellular Phone-1 used to transfer the call.

Cellular Phone-2

Trunk

Trunk

Telephone Company

Outside Caller

Trunk

Trunk

Extn. 101

Telephone
Company

Trunk

Trunk

PBX

Cellular Phone-1

Forward to
Cellular Phone-1

Transfer to
Cellular Phone-2

a.

c.

b.

•

DISA Reorder Tone Duration

It is possible to set the DISA Reorder Tone Duration time. This specifies the length of time that a reorder
tone will be sent to the caller. When the timer expires, the call will be disconnected. Call Retry is possible
during the DISA Reorder Tone Duration time.

®

 4.5  [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—

DISA—Reorder Tone Duration

•

Call Deny

Extensions can deny DISA calls on a COS basis.

®

 4.12  [2-7-1] Class of Service—COS Settings—Optional Device & Other Extensions—

Accept the Call

from DISA

•

Verification Code PIN Lock/Extension PIN Lock

If the wrong PIN is entered three times, the line will be disconnected. If the wrong PIN is entered a
preprogrammed number of times successively, that extension or verification code will become locked, and
even entering the correct PIN will not unlock it. Only an extension assigned as the manager can unlock it.
In this case, the PIN will be unlocked and cleared.

®

 4.5  [2-3] Timers & Counters—Miscellaneous—

Extension PIN—Lock Counter

•

DISA Automatic Walking COS

The KX-NCS3910, KX-NCS4910 or KX-NCS4950 (Activation Key for Software Upgrade to Enhanced
Version) is required to use this feature.

•

Each outgoing message (OGM) can be assigned a name through system programming for programming
reference.

®

 7.4  [5-3-2] Voice Message—DISA Message—

Name

®

 [731] Outgoing Message (OGM) Name

Document Version  2013-05  

Feature Manual

93

4.1.8 DISA (Direct Inward System Access)

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments