Panasonic KX-NCP500, Feature Manual

Page: 258 / 422

Conditions
•
A CO line which is used for a private network should be assigned "
Private
" as the networking type. (
®
9.1.10 INCOMING CALL FEATURES)
•
To establish a QSIG network (
®
13.1.20 PRIVATE NETWORK FEATURES—QSIG), each ISDN (QSIG)
connection in a TIE line network must have the port on one PBX assigned as a master port, and the port
on the other PBX assigned as a slave port. PBXs that support this feature are KX-NCP series, KX-TDE
series, and KX-TDA series PBXs.
[TIE Line Network Connection Example]
PBX-1
PBX-3
PBX-2
Extn.1000
:
Extn.1999
Extn. 2000
:
Extn. 2999
(A) Master
(B) Master
(C) Master
QSIG Network
(A) Slave
(C) Slave
(B) Slave
Extn. 3000
:
Extn. 3999
•
When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a busy
tone. If required, Intercept Routing can be activated.
•
The Inter-digit time can be assigned for TIE line calls.
®
4.5 [2-3] Timers & Counters—Miscellaneous— Incoming Call Inter-digit Timer—DID
PC Programming Manual References
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
3.12 [1-1] Slot—Shelf Property - Virtual IP Gateway—DN2IP
3.33 [1-1] Slot—Port Property - PRI Port—Network Numbering Plan—
Trunk Property
3.36 [1-1] Slot—Port Property - T1 Port— Trunk Property
4.5 [2-3] Timers & Counters—Miscellaneous— Incoming Call Inter-digit Timer—DID
4.9 [2-6-1] Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ TIE Line Access
4.9 [2-6-1] Numbering Plan—Main—Other PBX Extension
4.12 [2-7-1] Class of Service—COS Settings—TRS—
TRS Level—Day, Lunch, Break, Night
4.18 [2-9] System Options—Option 4— Private Network—TIE Call by Extension Numbering (Activation Key
Required)
5.1 [3-1-1] Trunk Group—TRG Settings—Main—
COS
11.1 [9-1] TIE Table
12.2 [10-2] DIL Table & Port Settings
→DIL— Trunk Property
→DIL— DIL Destination—Day, Lunch, Break, Night
→DID/TIE
12.3 [10-3] DID Table— DID Destination—Day, Lunch, Break, Night
12.6 [10-4] Miscellaneous— Intercept—Routing to Operator - No Destination (Destination is not
programmed.)
258 Feature Manual Document Version 2013-05
13.1.15 PRIVATE NETWORK FEATURES