manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual

Share
Download
Panasonic KX-NCP500 Feature Manual Download Page 17

[Carrier Selection Procedure Flowchart]

The numbers in parentheses indicate the corresponding items found under [Programming Procedures] on the
following pages.

No

No (Normal CO Line Access)

No

No

Yes

Is the ARS mode (1) enabled?

An extension user accesses a CO 
line and dials a telephone number.

Sends a 
reorder tone.

Sends a 
busy tone.

Checks the Routing Plan (4) to 
determine which carrier to use.

Modifies the dialed number by 
removing the digits and following 
the modify commands (5).

Sends the modified number 
to the CO line.

Yes

No

Is the carrier found in the 
appropriate time block (4)?

Yes

Is the dialed number found in the 
Leading Number Exception Table (2)?

No

Yes
(default)

Yes

Is normal 

CO Line Access 

allowed?

Because all CO 
lines are busy?

Yes

Is the dialed number found in 
the Leading Number Table (3)?

No

Is there an available 
trunk group (5)?

Yes

Sends the telephone 
number by the Idle 
Line Access. 

Sends the telephone 
number as dialed.

[Programming Procedures]
1.

ARS Mode

ARS is turned on by selecting under which circumstances it operates – either when an extension user
makes a call using the Idle Line Access method, or when any CO Line Access method is used (

®

 3.1.17  CO

Line Access). ARS can also be turned off for the entire system.

®

 10.1  [8-1] System Setting—

ARS Mode

®

 [320] ARS Mode

2.

Leading Number Exception Table

Once ARS is activated, store the telephone numbers that will bypass ARS in the Leading Number Exception
Table.
Note that the first few digits (leading number) of a telephone number, such as an area code or local
exchange, can also be stored, so that all calls to those areas or exchanges are exempted from ARS. Also

Document Version  2013-05  

Feature Manual

17

1.1.3 ARS (Automatic Route Selection)

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands