manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual, Page: 223 / 422

Share
Download
Panasonic KX-NCP500 Feature Manual Download Page 223

1. Connection Methods for On-site Programming

Method

Description

Required

Hardware

Serial Interface 
(RS-232C) port

The PC is connected to the PBX via the Serial Interface 
(RS-232C port) of the PBX.

–

USB

The PC is connected to the PBX via the USB port of a USB
Module attached to a digital proprietary telephone (DPT).

USB Module

LAN

The PC is connected to the PBX via the MNT port of the
MPR card.

MPR card

Modem 
(connected to
SLT port)

*1

The PC is connected to a modem, which is then connected to
an SLT port of the PBX. Use the modem to dial the floating
extension number (default: 599) assigned to the analog remote
maintenance feature to access the PBX.

RMT card and
user-supplied
modem

*1

Remote access must be enabled through system programming when performing on-site programming via modem.

2. Connection Methods for Remote Programming

Method

Description

Required

Hardware

Off-site modem

Call the PBX and have the call directed to the floating extension
number (default: 599) assigned to the analog remote
maintenance feature using one of the following methods:

Direct Access:

 Using the off-site modem, dial a telephone

number with the modem which will direct your call (via Direct
In Line (DIL) or Direct Inward Dialing (DID) distribution) to the
floating extension number assigned to the analog remote
maintenance feature.

DISA:

 Using a telephone, dial a telephone number which will

direct your call (via DIL or DID distribution) to a floating
extension number used by the Direct Inward System Access 
(DISA) feature (

®

 4.1.8  DISA (Direct Inward System

Access)). Next, dial the floating extension number assigned to
the analog remote maintenance feature. Then access the PBX
with the modem.

Call Transfer:

 Using a telephone, dial a telephone number

which will direct your call to an operator (or other extension of
the PBX) and request to be transferred to the floating extension
number assigned to the analog remote maintenance feature 
(

®

 3.1.11  Call Transfer). Then access the PBX with the

modem.

RMT card and
user-supplied
modem

Document Version  2013-05  

Feature Manual

223

13.1.6 PC Programming

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments