manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual, Page: 132 / 422

Share
Download
Panasonic KX-NCP500 Feature Manual Download Page 132

The FWD/DND button shows the current status as follows:

Light Pattern

Status (default)

Red on

DND on

Slow red flashing

FWD on

Off

FWD/DND off

The functions assigned to the "on" and "flashing" patterns can be changed through system programming.

Group FWD Button Types

The FWD feature for the incoming call distribution group can be customized on a flexible button. Multiple types
of Group FWD buttons can be customized on an extension.

Type

Description

FWD for Incoming Call
Distribution Group

Group FWD—Internal

Works for incoming intercom calls

Group FWD—External

Works for incoming CO line calls

Group FWD—Both

Works for all incoming calls

[Button Status]

The Group FWD button shows the current status as follows:

Light Pattern

Status (default)

Red on

FWD on

Off

FWD off

FWD/DND Setting by Fixed FWD/DND button

Pressing the fixed FWD/DND button in idle status allows the extension user to set the following items for FWD/
DND:

•

FWD/DND for CO line calls
The FWD/DND status for CO line calls to that extension can be switched temporarily without clearing the
FWD destination. During setting, the LED of the button shows the current CO line call FWD/DND status.
The forwarding type and destination for CO line calls can also be set.

•

FWD/DND for intercom calls
The FWD/DND status for intercom calls to that extension can be switched temporarily without clearing the
FWD destination. During setting, the LED of the button shows the current intercom call FWD/DND status.
The forwarding type and destination for intercom calls can also be set.

•

FWD—No Answer timer
The length of time until unanswered calls are forwarded can be modified. This setting is applied to both
intercom and CO line call forwarding.

•

FWD for Virtual PS
If the extension is the first registered extension in an Incoming Call Distribution Group, the extension user
can set the FWD destination and forwarding status (on/off) for up to 4 virtual PSs preregistered to the group.
(

®

 19.1.2  Virtual PS)

These settings are only available when FWD/DND buttons are set through system programming to FWD/DND
Setting mode.

132

Feature Manual

Document Version  2013-05  

6.1.7 FWD/DND Button, Group FWD Button

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments