manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual, Page: 174 / 422

Share
Download
Panasonic KX-NCP500 Feature Manual Download Page 174

Type

Description

No Destination

If a call has no destination (i.e., if a destination is not assigned), the call is
redirected to an operator. (

®

 9.1.12  Intercept Routing—No Destination)

Intercept Routing redirects calls to destinations based on the original destination of the call, as shown in the
table below. Different intercept destinations can be programmed for each time mode. Note that calls redirected
by Intercept Routing—No Answer/DND are directed to the same destination, while Intercept Routing—Busy
is directed to a separate destination, and the intercept destination for Intercept Routing—No Destination is
always an operator.

When the original destination is:

The Available Intercept Destination is:

•

Wired Extension (PT/SLT/SIP Extension/
T1-OPX)

•

PS

The destination assigned to the original extension.

6.1  [4-1-1] Wired Extension—Extension
Settings—Intercept Destination

→

Intercept Destination—When called party

does not answer—Day, Lunch, Break, Night

→

Intercept Destination—When Called Party is

Busy

6.10  [4-2-1] Portable Station—Extension
Settings—Intercept Destination

→

Intercept Destination—When called party

does not answer—Day, Lunch, Break, Night

→

Intercept Destination—When Called Party is

Busy

®

 [604] Extension Intercept Destination

•

ICD Group

The ICD Group Overflow destination assigned to the
group. (

®

 9.1.5  ICD Group Features—Overflow)

®

 5.12  [3-5-1] Incoming Call Distribution

Group—Group Settings—Overflow No Answer—
Time out & Manual Queue
Redirection—Destination-Day, Lunch, Break, Night

®

 [625] Destination for Overflow Time Expiration

•

VM Group (DTMF/DPT)

The destination assigned to the first extension of the
VM group.

•

DISA

*1

If all DISA ports are busy when a call is made using
DISA, one of the following can be selected through
system programming:

•

Disable:

 Busy tone is sent to the caller. When

using an analog CO line, a ringback tone is sent.

•

Operator:

 The call will be redirected to the

operator.

•

AA-0, AA-9:

 The call will be redirected to the

destination assigned to that AA number.

®

 7.3  [5-3-1] Voice Message—DISA

System—Option 1—

DISA Intercept—Intercept

when all DISA ports are busy

174

Feature Manual

Document Version  2013-05  

9.1.11 Intercept Routing

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments