En-8
4. Once all pegs have been located,
push the support towards the back
of the oven, until the part clicks
securely into position. Repeat the
process for the remaining shelf
supports.
5. The supports are now ready to
position the enamel shelf. Ensure
all shelf supports are securely in
position before placing
the shelf in the oven.
6. Insert the enamel shelf as shown.
The shelf supports do not need to
be removed for non-shelf cooking.
The supports can be removed for
cleaning, if required. To remove
the supports, repeat steps 1 - 4
above, in reverse order.
CAUTION!
●
The enamel shelf should only be used in
CONVECTION
mode.
It must be removed
for MICROWAVE, GRILL and COMBINATION functions, but the shelf supports
can stay in position.
●
Take care when removing the enamel shelf. It should be fully supported using two
hands
during removal
to avoid any possibility of enamel shelf and its contents tilting
or falling from shelf supports.
●
Clean the shelf supports with warm soapy water and a damp cloth. If cleaning the
oven cavity without the shelf supports in position, take care around the open slots.
●
The roller ring and glass turntable should be removed when using the enamel shelf
for cooking on one level
CONVECTION
.
Note:
The two shelf supports on either
side of the oven and closest to the
door need to be inserted vertically.
Push the support into the top slot
first, then locate the bottom peg
and push down.
Attaching Shelf Supports
