Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 4 / 364

4 Feature Manual
Feature Highlights
Networking Features
The Hybrid IP-PBX supports the following private networking features:
TIE Line Service
PBXs can be connected via a privately leased telephone lines, forming a private network. These "TIE
lines" provide a cost-effective way to route calls and communications, and are often used to connect
corporate offices located in different cities.
(
→
1.13.13 PRIVATE NETWORK FEATURES)
QSIG Support
TIE line service can be used on a private network that is established using Voice over Internet Protocol
(VoIP) with the IP-GW card, or ISDN (PRI) lines programmed to implement the QSIG protocol (Q.931).
QSIG offers TIE line service as well as advanced caller and called party identification features.
(
→
1.13.18 PRIVATE NETWORK FEATURES—QSIG)
Voice over Internet Protocol (VoIP) Support
The Hybrid-IP PBX can be used on a private network which implements VoIP. On this type of network,
information is sent over the private network in IP packets, which allows voice as well as data to be sent
to other devices in the private network. Automatic rerouting of VoIP calls to public CO lines is also
available in case of network difficulties.
(
→
1.13.23 Private Network Features—VoIP (Voice over Internet Protocol))
Built-in Small Call Center Features
Extensions can form an incoming call distribution (ICD) group and be used as a small call center which can
take advantage of several features, some of which are highlighted below.
Queuing
When all available extensions in an ICD group are busy, additional calls can be placed in a queue as
they arrive. While calls are waiting in the queue, callers can hear background music (BGM), an outgoing
message (OGM), etc.
(
→
1.9.6 ICD Group Features—Queuing)
Log-in/Log-out
Members of an ICD group can log-in to or log-out of a group manually. Group members can log-in at
the beginning of a work shift, and log-out at the end of the day. While logged-in, ICD group members
can be allotted a specified amount of time after completing a call during which new calls will not be
received by their extensions, allowing them to finish any necessary paperwork before being eligible to
receive new calls (Wrap-up).
(
→
1.9.3 ICD Group Features—Log-in/Log-out)
VIP Call
The VIP Call feature is one method of making sure that calls from preferred customers or callers are
answered quickly. When using VIP Call mode, ICD groups are assigned a priority, allowing calls in
higher-priority groups to be answered before calls in lower-priority groups.
(
→
1.9.8 ICD Group Features—VIP Call)
Computer Telephony Integration (CTI) Features
Computers can be connected to the Hybrid-IP PBX to provide extension users with access to advanced
features such as pop-up display of caller information, computer-based speed dialing, etc.
(
→
1.3.21 CTI (Computer Telephony Integration))
PC Phone/PC Console