
1.4 D
80
Feature Manual
DISA Intercept Routing—Busy
If the first destination called by the outside party is busy, the call is redirected as follows:
a)
The call is redirected to the Intercept Routing—Busy destination assigned to the first destination.
b)
If an Intercept Routing—Busy destination is not assigned to the first destination and a prerecorded
DISA Busy Message is assigned, the caller will hear the DISA Busy Message.
c)
If neither an intercept destination nor a DISA Busy Message is assigned, the caller will hear a busy
tone.
→
2.10.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—Intercept Destination—
When Called Party is Busy (MPR Software File Version 3.1000 or later)
DISA Intercept Routing—DND
If the destination called by the outside party is in DND mode and Idle Extension Hunting is not available,
one of the following can be selected through system programming:
a)
Busy Tone:
The caller will hear a busy tone.
b)
Intercept:
DND will redirect the call to the preprogrammed destination on an extension basis.
c)
OGM:
An outgoing message (OGM) will be sent to the caller. The message for DND mode can be
assigned for each outgoing message (OGM) which has a DISA floating extension number.
→
2.11.3 [5-3-1] Voice Message—DISA System—DISA Intercept—Intercept when Destination through
DISA Intercept Routing—No Answer
If a destination is not available to answer a DISA call within a preprogrammed time period (DISA Intercept
time) after the call is reached, the call will be redirected to the programmed destination by the Intercept
feature.
If the intercept destination is not available to answer the call within a preprogrammed time period (DISA
Disconnect Time after Intercept) after the DISA Intercept time expires, the call will be disconnected.
2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
→
DISA—Intercept Timer—Day, Lunch, Break, Night
→
DISA—Disconnect Timer after Intercept
→
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Intercept Destination—When called
party does not answer—Day, Lunch, Break, Night
→
2.10.10 [4-2-1] Portable Station—Extension Settings—Option 1—Intercept Destination—When called
party does not answer—Day, Lunch, Break, Night
→
[604] Extension Intercept Destination
Walking COS Through DISA
If the caller performs Walking COS (extension number and PIN entry) while hearing a DISA message, the
security mode can be temporarily changed to No Security mode (
→
1.20.1 Walking COS). After performing
Walking COS, the following features are available, using the settings of the specified extension:
•
Intercom call
•
TIE line call
•
CO line call
•
Call Forwarding (FWD)/Do Not Disturb (DND) setting (
→
→
•
Incoming Call Distribution Group Log-in/Log-out (
→
1.9.3 ICD Group Features—Log-in/Log-out)
•
Absent Message setting (
→
•
Extension Dial Lock (
→
Summary of Contents for HYBRID IP-PBX KX-TDA100
