Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 109 / 364

1.6 F
Feature Manual 109
Operating Manual References
3.1.4 Customizing the Buttons
1.6.4 Flexible Numbering/Fixed Numbering
Description
To dial another extension user or to access PBX features, the access numbers (extension numbers or
feature numbers) are required.
There are three types of numbering plans:
1) Flexible Numbering (available while a dial tone is heard)
2) Flexible Numbering (available while busy, DND, or ringback tone is heard)
3) Fixed Numbering (available while dialing or talking)
1.
Flexible Numbering (available while a dial tone is heard)
Extension numbers and feature numbers which are available while a dial tone is heard can be
customized for easy use. The numbers must not conflict. It is also possible to use default (Pattern 1 or
Pattern 2) shown in the following table:
a)
Extension Numbers: Extension numbers consist of leading numbers and additional numbers.
Extension numbers (consisting of “0” through “9”) can be assigned as follows:
• Numbering schemes: 1-64
• Leading number: up to two digits (for KX-TDA50/KX-TDA100/KX-TDA200) or three digits (for
KX-TDA600)
• Additional number: up to two digits (default: two digits)
[Example]
If the number "3" is programmed as a leading number for the 1st extension numbering scheme,
and "XX" is programmed as the additional digits, extension numbers 300 through 399 are
available.
b)
Feature Numbers: Up to four digits, consisting of 0-9, " ", and "#"
c)
Other PBX Extension Numbers (Other PBX Extension Number [TIE] 01 through 16): Up to
three digits, consisting of 0-9, " ", and "#"
[Flexible Numbering Table (available while a dial tone is heard)]