Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 144 / 364

1.9 I
144 Feature Manual
• Log-in/Log-out Button
A flexible button can be customized as the Log-in/Log-out button with the following parameters:
• If an ICD Group button is assigned, it also shows the log-in/log-out status of the corresponding group.
The light pattern is the same as the Log-in/Log-out button that includes the group number.
• Wrap-up Timer
– Two wrap-up timers can be programmed, an ICD Group member wrap-up timer and an extension
wrap-up timer. System programming selects which timer is used. When the ICD Group member
wrap-up timer is selected, the timer is only activated after calls to the extension through an ICD
Group. When the extension wrap-up timer is selected, the timer is activated after all calls to or from
the extension, including a retrieved call on hold.
– Only calls from ICD Groups cannot be received during the wrap-up time. Other calls are received
as normal.
– The wrap-up timer does not work for ISDN extensions or PS Ring Groups.
• Wrap-up Button
A flexible button can be customized as the Wrap-up button. It shows the current status as follows:
• When a PS in Wireless XDP Parallel Mode completes a call, neither the PS nor its wired telephone can
have Wrap-up time. (
→
1.20.4 Wireless XDP Parallel Mode)
• Automatic Log-out
A member extension may be logged out automatically, if the Unanswered time expires a
preprogrammed number of times consecutively. The number of consecutive unanswered calls can be
assigned for each incoming call distribution group. If the extension is a member of more than one
incoming call distribution group, the unanswered number is counted across all corresponding incoming
call distribution groups. It is possible to return to log-in mode manually.
The Automatic Log-out feature does not work for extensions in an incoming call distribution group using
the Ring distribution method (
→
1.9.2 ICD Group Features—Group Call Distribution).
• Log-in/Log-out Monitor
The supervisor extension can monitor and control the log-in/log-out status of the incoming call
distribution group members. (
→
1.9.7 ICD Group Features—Supervisory)
Parameter Usage
Light Pattern
Red on Off
No parameter Used with an ICD Group button, or with
the floating extension number of an
incoming call distribution group, or with
(All).
— —
Floating extension number of a
specified incoming call
distribution group Used to log in to or out of the specified
incoming call distribution group. Log-out
Status Log-in Status
(All)
Used to log in to or out of all incoming
call distribution groups to which the
extension user belongs. After Log-out
Operation After Log-in
Operation
Light pattern Status
Slow red flashing Wrap-up
Red on Not Ready
Off Ready (Wrap-up mode cancel)