Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 27 / 364

1.1 A
Feature Manual 27
Installation Manual References
2.5.3 MSG2 Card (KX-TDA5191)
Programming References
PC Programming Manual
2.11.4 [5-3-2] Voice Message—DISA Message—Fax Extension (KX-TDA50 only)
PT Programming Manual
None
Feature Manual References
1.4.7 DISA (Direct Inward System Access)
2.2 Exclusive Features Table
1.1.7 Automatic Time Adjustment
Description
The PBX clock can be adjusted automatically in the following two ways:
1.
Daylight Saving Time Setting
The start and end dates of Daylight Saving Time can be programmed. The PBX clock will automatically
adjust itself one hour forward or backward at 2:00 A.M. on the programmed date, if enabled through
system programming. At 2:00 A.M. on the start date, the clock will change to 3:00 A.M., and at 2:00
A.M. on the end date, the clock will change to 1:00 A.M.
Note
If a Timed Reminder (Remote Wake-up call) is set:
– On the Daylight Saving Time start date, a reminder set for between 2:00 A.M. and 3:00 A.M.
will not ring.
– On the Daylight Saving Time end date, a reminder set for between 1:00 A.M. and 2:00 A.M.
will ring twice.
2.
Time Information from Telephone Company
Time information can be received when
– An incoming or outgoing call through an ISDN line is received/made.
– An incoming call through an analog line with Caller ID which includes time information is received.
The PBX clock will be adjusted everyday with the first call after 3:05 AM, if enabled through system
programming.
Note
If a Timed Reminder (Remote Wake-up call) is set, the setting will not ring or will ring twice
depending on the adjustment.