manualshive.com logo in svg

Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 3 / 364

Share
Download
Panasonic HYBRID IP-PBX KX-TDA100 Feature Manual Download Page 3

Feature Manual

3

•

Installation Manual References

•

Feature Manual References

•

Operating Manual References

•

PT Programming References

•

PC Programming References

Abbreviations

There are many abbreviations used in this manual (e.g., "PT", for proprietary telephone). Please refer to the 
list in the next section for the meaning of each abbreviation.

Notes

•

The contents of this manual apply to PBXs with a certain software version, as indicated on the 
cover of this manual. To confirm the software version of your PBX, see How do I confirm the 
software version of the PBX or installed cards? in the FAQ of the PC Programming Manual, or 
[190] Main Processing (MPR) Software Version Reference in the PT Programming Manual.

•

Some optional service cards, PTs, and features are not available in some areas. In the same 
respect, some optional service cards and features are available exclusively for the KX-TDA50, KX-
TDA100, KX-TDA200, or KX-TDA600. Please consult your certified Panasonic dealer for more 
information.

→

 2.2 Exclusive Features Table

•

Product specifications are subject to change without notice. In some cases, additional information, 
including updates to this and other manuals, is included in the KX-TDA Maintenance Console's 

Information Before Programming

. Install the latest version of Maintenance Console to view this 

information.

•

All system programming can be performed through PC programming (

→

 1.13.6 PC Programming). 

However, only a subset can be performed through PT programming (

→

 1.13.28 PT Programming). 

Throughout this manual, programming references are included as follows: 

PC Programming

The number within the brackets indicates the System Menu number for the Maintenance Console. 

→

 2.12.1 [6-1] System Speed Dial—CO Line Access  Telephone Number

PT Programming

The number within the brackets indicates the programming number that is entered when 
performing PT programming.

→

 [001] System Speed Dialing Number

For further details, please refer to the PC Programming Manual and PT Programming Manual.

WARNING

Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes 
unusual noise. These conditions can cause fire or electric shock. Confirm that smoke 
has stopped and contact an authorized Panasonic Factory Service Center.

Trademarks

•

Microsoft, Windows, and Outlook are either registered trademarks or trademarks of Microsoft 
Corporation in the United States and/or other countries.

•

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the 
United States and other countries.

•

All other trademarks identified herein are the property of their respective owners.

Summary of Contents for HYBRID IP-PBX KX-TDA100













































































































































































































































































































































































Reviews:

No comments