Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 69 / 364

1.4 D
Feature Manual 69
Conditions
• Dial Tone Type A/B
Through system programming, it is possible to select dial tone type A or B for dial tones 1 through 4. If
"
Type A
" is selected, all dial tones 1 through 4 will become dial tone type A.
The dial tone type for the ARS feature can be selected separately. If "
Type A
" is selected for ARS, dial
tone 1A will be heard. If "
Type B
" is selected, dial tone 1B will be heard.
• Distinctive Dial tone
Distinctive dial tones can be disabled. When disabled, dial tone 1 will be heard in all cases except those
marked with "*" in the table above.
• Dial Tone Patterns
All dial tone patterns have a default (
→
2.3 Tones/Ring Tones).
• Only dial tone 1 is sent to the extensions in a VM (DPT/DTMF) group. (
→
1.19.3 Voice Mail (VM) Group)
Programming References
PC Programming Manual
2.8.17 [2-9] System Options—Option 3
→
Dial Tone—Distinctive Dial Tone
→
Dial Tone—Dial Tone for Extension
→
Dial Tone—Dial Tone for ARS
PT Programming Manual
None
1.4.4 Dial Tone Transfer
Description
An extension assigned as the manager can change the TRS level (
→
1.17.6 TRS (Toll Restriction)) for an
extension user temporarily. After that, the extension user can make his call.
Tone 3A/3B This tone is heard when:
• A called PS is being searched for.
• The recording time used by the Simplified Voice Message (SVM) feature
reaches the limit.*
• Any of the features below are performed.
• Account Code Entry
• Consultation Hold
• Answering a Timed Reminder call with no message
Tone 4A/4B This tone is heard when new messages have been recorded for the
extension.
*: Active even when distinctive dial tones are disabled.
Type Description