Panasonic HYBRID IP-PBX KX-TDA100, Feature Manual, Page: 74 / 364

1.4 D
74 Feature Manual
[Method Flowchart]
[Programming Example: DIL Table]
The table can be programmed for each CO line.
In this example:
If a CO line call is received on CO line 01:
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination,
if assigned. If not assigned, the call is routed to the Direct In Line (DIL) destination, extension 101.
In lunch mode: CLI distribution is disabled. The call is routed to the DIL destination, extension 100.
Note
Tenant numbers and VPS trunk group numbers (not shown here) can also be programmed in the DIL
Table.
* :
→
2.16.2 [10-2] DIL Table & Port Settings—DIL—DIL Destination—Day, Lunch, Break, Night
→
[450] DIL 1:1 Destination
A CO line call is received.
Yes
Yes
No
Does the call have
Caller ID information and is CLI
distribution enabled for the CO line in
the current time mode?
No
Has the caller
been stored in the System Speed
Dialing Table and has a CLI destination
been assigned?
The call is routed to the
DIL destination.
The call is routed to its
CLI destination.
The call is routed to an
operator (Intercept
Routing—No Destination).
Yes
Is a DIL destination assigned
for the current time mode?
No
Port No.
(CO Line No.)
01
02
Day
Enable
Enable
Lunch
Disable
Disable
Night
Disable
Disable
Break
Enable
Disable
Day
101
102
Lunch
100
100
Night
100
100
Break
101
102
CLI Distribution DIL Destination
*